Skip To Content
Turtle Wax

Turtle Wax Headlight Lens Restorer Kit

EACH
$9.33 each
Victoria H‑E‑B plus!
6106 N. NAVARRO

Description

Clarity in minutes! Rejuvenates dull, yellowed headlights. Restore, don't replace. Enhances driving safety with improved headlight effectiveness. Save Money! Don't replace, restore! The Turtle Wax Headlight Lens Restorer Kit combines the ease and speed of liquid restorers with the unmatched effectiveness of restoration pads to restore headlight lenses to like new clarity. Lightly yellowed or oxidized lenses can be restored in minutes! Kit Includes: 4 fl oz (118 ml) lens clarifying compound; 4 fl oz (118 ml) spray lubricant; 1- 4 x 4 inch lens sealing wipe; Kit Includes: 3 Restoration Pads: 1-2 x 2 inch green pad - level 1; 1-2 x 2 inch brown pad - level 2; 1-2 x 2 2-sided purple pad. One side level 3, one side level 4. Headlight lens clarity will dramatically improve with proper use of this kit. Cracked, micro-cracked, severely pitted, water fogged from the inside or severely weathered lenses may not return to the original condition. Made in USA.

  • Allergens and safety warnings

    Contains products which may be harmful if misused, read warnings on each container. Keep out of reach of children.

  • 1. Wash headlight lens to remove surface dirt. 2. If lens to be restored is next to painted surfaces, use masking tape to protect the paint. 3. Apply lens clarifying compound to a cotton cloth. Rub compound over entire lens using firm pressure. Buff with clean terry cloth. Restore only one lens at a time. If lens does not come clean with lens clarifying compound, proceed to step 4. 4. Apply spray lube to level 1 pad (green pad) and to lens to be restored. Use pads on only those areas requiring restoration. Begin rubbing the level 1 pad, using firm finger pressure, in a back and forth motion over the lens, continuing until much of the oxidation is removed. Use the spray lube as necessary to keep the lens and pad wet. (The green level 1 pad will require the longest use.) 5. Immediately switch to the level 2 pad (brown). Rub back and forth in the opposite direction (90 degrees) of the level 1 pad for about 1 minute, keeping the pad and lens surface wet using the spray lubricant. Switch to the level 3 side of the final pad (purple) and repeat the process for 1 minute. Flip to the level 4 side of the final pad (blue) and repeat the process for 1 minute. 6. Dry the lens with a cotton towel. Apply lens clarifying compound and rub thoroughly back and forth until the lent clarifies. Let compound dry to a haze and buff with a cotton cloth. Lens clarifying compound can be applied by machine with a foam pad at 1500 RPMs. 7. Open the pouch containing the lens sealing wipe. Using plastic glove, coat the newly restored lenses with the wipe. This will help prevent future yellowing and dulling. Coating will dry and cure within 24 hours.