OxiClean
OxiClean Versatile Laundry Stain Remover 156 Loads
115.52 oz
$15.58 each($0.10 / load)
Aisle 16
Victoria H‑E‑B plus!
6106 N. NAVARRO
Description
156 loads (Delivers 156 loads/uses when measuring to Line 1 on scoop, 109 loads/uses when measuring to Line 2, 27 loads/uses when measuring to Line 4). For all machines including he. Chlorine free. 99% active stain fighters. Use All Around Your Home: whites; colors; uniforms; tablecloths; pet stains; upholstery; patio; carpets; grout; shower walls. Safe for all colors. It's not clean unless it's OxiClean. 1 box of OxiClean = 156 loads of laundry brightened. 156 carpet stains removed. Makes Every Load: cleaner; whiter; brighter.
Ingredients
Sodium Carbonate, Sodium Carbonate Peroxide, C12-15 Alcohols Ethoxylated, Sodium Chloride, Colorants, Fragrances.Allergens and safety warnings
Injurious to eyes. Harmful if swallowed. Avoid powder or solution contact with eyes and prolonged skin contact (wear gloves). Eye Contact: Flush with water for 15 minutes; seek medical attention immediately. If Swallowed: Drink a glass of water; do not induce vomiting; seek medical attention immediately. Skin Contact: Flush with water. Do not mix with products containing ammonia, chlorine bleach, or with other household chemicals. Do not mix or store solution in a sealed container, as pressure can build up and container may rupture causing injury. Do not heat or boil water for use with OxiClean. Contains no phosphates.- Add to every load. To maintain freshness, close bag after every use. Cleaner, Whiter, Brighter: Add to every load. Top Loader: Fill washer with water. Add OxiClean and detergent before adding laundry. Line 1 - 3. Fill to Line 1 for regular loads, or more for large or heavily soiled loads. HE Washer (Do not mix OxiClean with detergent in the dispenser. Read your he owner's manual for instructions): Add oxiclean to washer before adding laundry. Tough Laundry Stains: Mix until completely dissolved. Use warm or hot water. Do not heat or boil. Do not mix or store solution in sealed container. Soak for best results. 1. Mix: Fill scoop to line 2 to 4 per 1 gallon of water. Submerge stained items in solution after dissolved. Line 2 - 4. Line 2 for typical stains or line 4 for extra tough stains. 2. Soak 1-6 hours. Depending on severity of stain, some stains may require more time to soak. For best results soak for 6 hours. 3. Wash as normal with detergent and OxiClean. Soft Surface Stains: Use only on water-washable upholstery and rugs. Mix: Fill to line 1 per 16 ounces of water. Remove excess stains before treating. Line 1. For Carpet: Apply only enough solution to saturate stain. Allow solution to stand 1-5 minutes. Do not allow solution to dry on fabrics. Blot with white towel. Repeat until stain is not visible. Rinse carpet with clean water and blot until dry. For Upholstery: Do not apply solution directly on stain. Apply with clean white towel and use towel to blot out stain. Repeat until stain is not visible. Then, dampen a clean white towel with water and blot area to rinse. Hard Surfaces: 1. Mix: Fill to line 4 per gallon of water. Note: for some surfaces, like grout, a more concentrated solution/paste may be used. Line 4. 2. Apply using a cloth. Sponge, brush, or by pouring solution directly onto surface. 3. Let stand 5-30 min. Scrub as needed. For large surfaces, work with small areas, so solution does not dry on the surface. 4. Rinse well with cool water. Read before use. Directions: 1). Always test OxiClean on an inconspicuous area first. Rinse, allow to dry. Safe on colorfast fabrics only. 2). Follow manufacturer's instructions for water temperature and for cleaning garment or item. 3). Do not use on wool, wool blends, silk, silk blends, leather, or on fabrics labeled dry clean only. Not for use on jewelry, latex paints, woven baskets, unpainted wicker, jute, teak, or finished woods. Metals must not be soaked and must be rinsed immediately and thoroughly. Not for use on rust, dried paint, or bleach damage. Safe for septic tanks. 4). OxiClean works best in warm to hot water. If washing with cold water, first dissolve OxiClean in 16 oz of warm to hot water. Add to cold water. 5). Treat stains while fresh. Always rinse well with cool water. Do not place fabric that has not been thoroughly rinsed into dryer. 6). Some stains require repeated or longer treatments. Adding more OxiClean powder than directed increases the risk of color loss.
