Motor Trend
Motor Trend All Season 10 Gauge Jumper Cable
EACH
$8.29 each
Victoria H‑E‑B plus!
6106 N. NAVARRO
Description
12 ft. For use with 4, 6 & 8 cylinder cars, vans & light pickups. Phase marked 250 amp clamps for added safety. Suitable for use in extreme temperatures. Tangle free/extra flexible construction.
- 1. We recommend that eye protection be worn when jump starting a vehicle. 2. Accidents can occur. In the event that an accident might occur whereby any acid or foreign matter comes in contact with eyes, skin or clothing and contamination should occur, the foreign matter must be immediately flushed from the eyes, skin or clothing. Contact a physician immediately. 3. Vehicles should not touch in order to limit any potential sparks. 4. If the batteries have vents or caps place a cloth over them in order to discourage the formation of harmful gases. Do not smoke. 5. Consult your vehicle owner's manual for jump starting instructions. 6. The engine should not be running in the vehicle being used to jump the inoperative vehicle. 7. Carefully connect one red positive (+) cable and to the positive (+) post of the dead battery. 8. Carefully connect the other positive (+) cable end to the good battery. 9. Connect one of the negative (-) cable ends to the negative (-) post of the good battery. 10. Connect the other negative (-) end to an engine ground such as the metal engine block (Not the negative (-) battery post). Consult your vehicle owner's manual. 11. Avoid all moving parts. 12. Step back from vehicle being jumped. Start the boosting vehicle first and then engage the starter on the dead vehicle. Do not engage for an extended period of time. 13. On vehicles with a computer it is advisable to turn on the high beam lights to avoid a surge in voltage and to protect the vehicle's computer. Consult your vehicle owner's manual or contact your local automobile dealership. 14. After starting, carefully remove the cables in the reverse order.