Loctite Tite Foam

12 oz

$7.24 each($0.60 / oz)

Aisle 24

Victoria H‑E‑B plus!

6106 N. NAVARRO

Description

Fills, seals and insulates effectively around gaps and cracks up to 1" in size. Premium durability withstands harsh UV rays for long-lasting results. High density foam with uniform cell structure for durability and overall insulation. Superior flexibility and strong adhesion. Bonds to most building materials like wood, concrete, brick, stone, metal, PVC and more.

Allergens and safety warnings
Danger! Extremely flammable. Vapor may cause flash fire. Vapor and spray mist harmful, overexpose may cause lung damage. May cause allergic respiratory and skin reaction. Contents under pressure. Read back panel carefully for other cautions. Contains polyurethane prepolymer, methylenediphenyldiisocyanate polymer, diphenylmethanediisocyanate, dimethylether and hydrocarbon propellant mixture. Do not use near sparks, heat or open flame. Vapors will accumulate readily and may ignite explosively. Ventilate area during use and until all vapors are gone. Do not smoke. Extinguish all ignition sources. If burned, dried foam may release hazardous decomposition products. Dried foam may be combustible if exposed to flame or temperatures above 240 degrees F. Avoid prolonged exposure to sunlight or heat from radiators, stoves, hot water and other heat sources that may cause bursting. Do not puncture, incinerate, burn or store above 120 degrees F. Do not discard empty can in garbage compactor. Gives off harmful vapor of solvents and isocyanates. Do not use if you have chronic lung or breathing problems, or if you have ever had a reaction to isocyanates. Use with adequate ventilation. Use appropriate respiratory protection when potential to exceed exposure limits exist. If you have breathing problems during use, leave the area and get fresh air. If symptoms develop or persist, call a doctor or obtain medical treatment; have this label with you. Eye and skin irritant. Avoid contact with eyes and skin. Prolonged or repeated skin contact may lead to sensitization and dermatitis. Wash hands after using. Do not swallow. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. First Aid: For eye contact flush with water for 15 minutes. Call a physician if irritation develops and persists. For skin contact, wipe off excess uncured foam with clean rag or paper towel immediately. Get medical attention if irritation develops and persists. If affected by inhalation, remove to fresh air and contact a physician. If swallowed, do not induce vomiting. Call a physician or Poison Control Center immediately. Keep out of reach of children.
How to use? Shake vigorously for 30 seconds. Screw straw into valve. Squeeze trigger to dispense foam. 1. Always wear eye protection, gloves and proper work clothing when using foam. Cured foam is difficult to remove from skin, clothing and other substrates. 2. For optimum performance shake can intermittently during extended use. 3. Make sure surface is clean and free from dirt, dust, and other substances. Cover surfaces not intended to be foamed. 4. Dispense foam sparingly: Fill void by half to avoid overflows. 5. Mist with water to speed cure. 6. If necessary, cured foam can be trimmed with a knife after 1 hour. 7. Clean spills immediately with acetone. Refer to TDS for detailed instructions.