J-B Weld

J-B Weld Twin Tube Original Cold Weld Two-Part Epoxy

1 oz

$6.80 each($6.80 / oz)

Aisle 24

Victoria H‑E‑B plus!

6106 N. NAVARRO

Description

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.

Great For:

-Household Repairs

-Automotive

-Plumbing

-Marine

-Crafts & More

Ingredients
Hardener Contains: Polyamide, Aliphatic Polyamines, Dipropylene Glycol, Benzyl Alcohol. Resin Contains: Epoxy Resins from Reaction of Epichlorhydrin with Bisphenol A and Bisphenol F; Polymer from Formaldehyde and Dimethylbenzene.
Allergens and safety warnings
May be harmful if swallowed. Eye irritant. May irritate skin, exposure may cause allergic reactions. Precautions: Avoid ingestion. Do not get in eyes, or on skin or clothing. Use with adequate ventilation. Do not use near or allow contact with open flame. Wash hands thoroughly with soap and water after use. Keep out of reach of children. First Aid: If swallowed, get prompt medical attention; do not induce vomiting. If eye contact occurs, rinse with water for 10-15 minutes; see physician if irritation persists. If on skin, wash with soap and water; seek medical care if skin irritation develops. This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
1. Prepare: Clean repair area of dirt, grease, oil, paint, rust, etc (For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair). 2. Mix: Squeeze equal parts from each tube onto a disposable surface and mix thoroughly. 3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed. 4. Dry: Sets in 4-6 hours. Cures in 15-24 hours. Allow 4-6 hours before handling and 15 hours (min) before putting object back in use.