Gumout Carb/Choke & Parts Cleaner

14 oz

$3.99 each($0.29 / oz)

Victoria H‑E‑B plus!

6106 N. NAVARRO

Description

Overtime, carburetors and choke valves can become clogged with gum, varnish and dirt, affecting performance. Gumout Carb/Choke & Parts Cleaner quickly removes these deposits from the inside and outside of the carburetor to improve engine performance and fuel economy. It also effectively cleans all nonpainted metal parts and surfaces. Helps stop hard starting & rough idling.

Allergens and safety warnings
Danger: Extremely flammable. Contents under pressure. Harmful or fatal if swallowed. Vapor harmful. Eye irritant. Read carefully other cautions on back. Keep away from battery terminals and electrical connections. Contains acetone, toluene and carbon dioxide. Prolonged and repeated skin contact may cause drying of skin. Precautionary Measures: Do not puncture, incinerate or store above 120 degrees F. Avoid prolonged exposure to sunlight. Keep away from heat, sparks, flames and other ignition sources. Exposure to heat may cause can to burst. Avoid breathing of mists and vapors. Use only in well ventilated areas. Avoid skin and eye contact. Wash thoroughly after handling. First Aid: If swallowed, do not induce vomiting. Call physician immediately. For eye contact, wash thoroughly with water. If inhaled, breathe fresh air. If not breathing, give artificial respiration. Call physician immediately. Use only as directed. Intentional misuse by deliberately concentrating and/or inhaling can be harmful or fatal. Keep out of reach of children. For health emergencies call: 1-877-504-9352. This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Shake can thoroughly before use. Spray with can in upright position. Insert plastic tube firmly into valve button. With Engine Off and Cool: Carburetor - Remove the air cleaner and clean the outside of the carburetor and all of the linkage. Avoid spraying electrical connections. Manifold Heat Control - Spray Gumout on exposed ends of cool heat riser shaft. Allow to penetrate and clean. Move counterweight up and down until free. With Engine Running: Carburetor - Spray Gumout to both ends of the choke valve shaft while working choke by hand. Spray down and around the carburetor throat to remove deposits from the throttle plate area. Do not spray down carburetor throat with engine off. Do not spray below throttle plate. Choke - If choke sticks, remove choke cover and spray. PCV Valve - Disconnect the crankcase side of the valve and spray Gumout into the open end of the valve while working the plunger back and forth. Not recommended for fuel injected vehicles. If sprayed on painted surface, wipe off at once.