Gorilla

Gorilla Precision Glue Pen

.75 oz

$5.03 each

Victoria H‑E‑B plus!

6106 N. NAVARRO

Description

Incredibly strong. Tough. For the toughest jobs on planet Earth. Dries white pen. Precision tip for small jobs or tight fits. Incredibly strong, 100% waterproof. Bonds: wood, stone, metal, ceramics, foam, glass and more! Good housekeeping since 1909 - Limited warranty to consumers. Clamp time. Water activated. Expands 3-4x size. www.gorillatough.com. Made in USA.

Allergens and safety warnings
Harmful or fatal if swallowed. Skin and eye irritant. Keep out of reach of children and pets. Do not microwave or heat. Do not leave in hot vehicle. May cause sensitization by inhalation and skin contact. Individuals with chronic asthmatic conditions should consult physician prior to using product. Contains 4,4'-methylenediphenyl diisocyanate. Prevent contact with skin and eyes. May cause gastro-intestinal blockage if swallowed. For medical emergencies only, call 1-800-420-7186. First Aid: Eye Contact: Flush thoroughly with water for at least 15 mins., and seek immediate medical attention. Skin Contact: For wet glue, wipe off with dry cloth. For dried glue, wash affected areas with a gritty textured soap and cool water. Follow-up with moisturizers liberally and frequently. Gorilla Glue may temporarily stain skin. Inhalation: If inhalation causes physical discomfort, move to fresh air. If breathing difficulty occurs or if product is swallowed seek medical attention.
Gorilla glue is not an instant glue. All surfaces must be clean and tight fitting. Wear gloves to avoid skin contact. Gorilla Glue will stain skin and ruin clothes. Damp It! Gorilla Glue is cured with moisture. Lightly dampen bonding surfaces with water. Glue It! Spread a thin layer of Gorilla Glue on either surface. Clamp It: Clamp objects together for 30-60 minutes. You can use heavy objects to achieve clamping pressure. Bond line improves with better clamping. Note: While curing, glue will expand 3-4 times. Be careful of squeeze-out. Do not over apply glue. Not recommended for use on polypropylene or polyethylene plastics. Clean-Up: Wipe wet glue off project immediately with dry cloth and/or paint thinner. Cured glue can be removed from work piece with chisel, scraper or sandpaper. See First Aid section for removal from skin. Storage: After each use, wipe nozzle clean with a dry cloth. Squeeze all air from bottle. While still squeezing, tightly replace lid. Min. Coverage: 1/2 oz. per sq. ft. Open Working Time: Up to 5-10 minutes. Clamp: 30-60 minutes at 68-130 degrees F. Best at room temperature. Cure Time: 80% in 1 hour. Allow bond to cure for 24 hours. Full cure dependent on temperature and humidity. Moisture Content: Best results from 10-25%. Below 10%, dampen surfaces with water.