Flex Seal
Flex Seal Mini Liquid Rubber Sealant Coating Spray – Black
2 oz
$6.22 each($3.11 / oz)
Victoria H‑E‑B plus!
6106 N. NAVARRO
Description
Flex Seal Mini is actually liquid rubber in a can! It sprays out as a thick liquid, seeps into cracks and holes and dries to a watertight, flexible, rubberized coating. Sprays out as a thick liquid, seeps into cracks and holes and dries to a watertight, flexible, rubberized coating that Stops Leaks Fast! Once dry, can be painted any color.
Color: Black
Works on: Wood, metal, tile, concrete, masonry, fabric, glass, plastic, aluminum, porcelain, dry wall, rubber, cement, some vinyl’s and more.
Color: Black
Works on: Wood, metal, tile, concrete, masonry, fabric, glass, plastic, aluminum, porcelain, dry wall, rubber, cement, some vinyl’s and more.
Ingredients
Distillates (Petroleum), Light , Distillate Hydrotreating Process, Low-boiling, Toluene , Butane, Odorless Mineral Spirits, PropaneAllergens and safety warnings
This product can expose you to chemicals including carbon black and ethyl benzene, which are known to the State of California to cause cancer, and toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more info go to www.P65Warnings.ca.gov.
Danger: Extremely flammable. Harmful or fatal if swallowed. Vapor harmful. May cause eye, skin, and respiratory tract irritation. Contents under pressure. See other cautions on back panel.
Contains Toluene (108-88-3), Odorless Mineral Spirits (64742-48-9), Aliphatic Petroleum Solvent (64742-89-8), Calcium Carbonate (1317-65-3), Carbon Black (1333-86-4) and Liquefied Petroleum Gas (68476-86-8).
Use only in a well-ventilated area. When using inside, prevent vapor buildup by opening doors and windows. Ensure fresh air entry during application and drying.
Do not use near heat, sparks, pilot lights or other sources of ignition. Do not smoke. When covering large areas indoors eliminate ignition sources far from the point of use because vapors are heavier than air and may travel significant distances. Intentional misuse by concentrating and inhaling the product can be harmful or fatal. Avoid contact with eyes or prolonged contact with skin. Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 120 degrees F
First Aid:
If Eye Contact: Flush with large amounts of cool running water for at least 15 minutes while holding upper and lower lids open. Remove contact lenses, if present and easy to do. If irritation persists, get medical attention immediately.
If Skin Contact: Wash with soap and water. If irritation persists, seek medical attention. Excessive Inhalation: Remove to fresh air. Seek medical attention immediately. If breathing stops give artificial respiration.
If Ingested: Do not induce vomiting. Seek medical attention immediately. Keep out of reach of children.- So easy to use! Read entire can. Wear face and eye protection, protective gloves and clothing. Make sure the area is clean, dry and free of grease, oil & dirt.
Shake well: Spray 8 inches to 12 inches from surface. Apply several coats until all cracks and holes have been filled. Allow 24 to 48 hours to fully cure.
Not recommended for extreme heat or gasoline related applications. Do not use on high pressure areas or tires. Works best at can temperatures above 60 degrees F.
Note: After each use, invert can and apply a short burst to clear nozzle. Not intended for use by Professional Roofers. This product has not been tested for use in potable water systems. May not be compatible with all plastics, vinyl's & rubbers. "
