Flex Paste

Flex Paste Super Think Rubber Paste - White

1 lb

$15.58 each($0.97 / oz)

Victoria H‑E‑B plus!

6106 N. NAVARRO

Description

Starts out as a thick paste and dries to a strong, flexible, rubber coating. Won’t shrink or wash away and can be painted any color. Can be applied on dry or wet surfaces, even underwater. Available in white and black. In Tubs and Cartridges. • Fix cracks and holes • Foundation and concrete repair • Seal out rodents and pests • Bath and shower repair • Indoor and outdoor projects • Roof repair • RV and motorhome repair • Auto repairs and boat repairs • Lawn and garden projects and much more

Allergens and safety warnings
FIRST AID TREATMENT: IF IN EYES: IMMEDIATELY RINSE WITH WATER FOR 15 MINUTES. REMOVE CONTACT LENSES, IF APPLICABLE, AND CONTINUE FLUSHING FOR 15 MINUTES. IF IRRITATION PERSISTS CALL A PHYSICIAN. CONTAINS N-(3-TRIMETHOXYSILYL) PROPYL) ETHYLENEDIAMINE. SKIN CONTACT: WASH SKIN THOROUGHLY AFTER HANDLING. SEEK MEDICAL ATTENTION IF IRRITATION DEVELOPS & PERSISTS.,WARNING: MAY IRRITATE EYES, SEE CAUTIONS ON THE REVERSE PANEL. WARNING: MAY CAUSE EYE IRRITATION. KEEP OUT OF REACH OF CHILDREN.
USE ON: WOOD, GLASS, FILE, CONCRETE, ALUMINUM, METAL BRICK, STUCCO, MASONRY, COPPER, FABRIC, FIBERGLASS, CERAMIC, PORCELAIN, NATURAL STONES, ROOFING, PVC, EIFS, EPDM, CSPE, HYPALON POLYURETHANES & SO MUCH MORE! READ ENTIRE DITECTIONS PRIOR TO USE! DIRECTIONS: PROTECTIVE CLOTHING & EYEWEAR ARE RECOMMENDED. DO NOT SHAKE OR STIR PRODUCT. SURFACE MUST BE FREE OF GREASE, OIL & DIRT. REMOVE SILICA GEL POCKET AND SLOWLY LIFT PROTECTIVE FOIL FROM THE SURFACE. DO NOT DISCARD FOIL OR SILICA GEL POCKET. USING PUTTY KNIFE, TROWEL OR SIMILAR TOOL, REMOVE AN EVEN LAYER FROM THE TOP SURFACE. DO NOT SCOOP DEEPLY INTO THE TUB AS THIS MAY CREATE AIR POCKETS. APPLY A GENEROUS AMOUNT TO THE SURFACE USING SMOOTH MOTION. ETCHING THE SURFACE WILL INCREASE ADHESION. SANDING IS NOT RECOMMENDED, INSTEAD SMOOTH TO DESIRED FINISH OR ADD DESIGNS TO CREATE UNIQUE ARTISTIC TEXTURES. ALWAYS MAKE SURE ALL CRACKS & HOLES HAVE BEEN COMPLETELY FILLED & CURED BEFORE TESTING. DRY TIME: FLEX PASTE BEGINS TO CURE ONCE EXPOSED TO AIR, MOISTURE & HUMIDITY AND WILL SKIN IN 15 TO 30 MINUTES. ALLOW 24-48 HOURS FOR CURING AND BETWEEN COATS. CLEAN UP: USE A DRY CLOTH OR PAPER TOWEL TO CLEAN TOOLS AND WORK AREA. DO NOT USE WATER. MINERAL SPIRITS OR ALCOHOL WITH AID PROCESS. PRESERVING FLEX PASTE: AFTER EACH USE, PRESS THE FOIL ONTO THE CENTER OF THE REMAINING MATERIAL AND CONTINUE PRESSING OUTWARD SO THE FOIL REMAINS IN CONTACT WITH THE MATERIAL. AS FOIL REACHES THE EDGE OF THE TUB, PRESS AROUND THE INSIDE PERIMETER, KEEPING THE EXCESS FOIL UP. REPLACE SILICA GEL PACKET AND SECURE THE LID TIGHTLY. BEFORE REUSE, REMOVE ANY DRIED MATERIAL THAT MAY HAVE FORMED ON THE INSIDE PERIMETER OF THE TUB OR ON THE SURFACE. STORE IN A HUMIDITY-CONTROLLED ENVIRONMENT. STORE IN A COOL DRY PLACE. KEEP CLOSED.