Command
Command Refill Mounting Strips, Assorted Sizes
16 CT
$3.71 each($0.23 / ct)
Aisle 24
Victoria H‑E‑B plus!
6106 N. NAVARRO
Description
Command™ Replacement Mounting Strips make it easy to move and rehang your Command™ Products for cleaning, redecoration or re-organization. Like all Command™ Products, they hold strongly on a variety of surfaces, including tile, wood, metal and painted surfaces. Yet they also remove cleanly - no holes, marks, sticky residue or stains. Command™ Refill Strips come in both small, medium and large sizes. Also a great for replacement for double sided sticky tape. Holds strongly yet removes cleanly. Contains 8 small strips, 4 medium strips, 4 large strips
•Damage-Free Hanging
•Weight Capacity: 1 pound, 3 pounds, 5 pounds
•Size: Small, Medium and Large
•Color: White
•Package Contents: 8 small strips, 4 medium strips, 4 large strips
•Holds strongly and removes cleanly
•Easy to apply and remove
•Works on a variety of surfaces
Allergens and safety warnings
Caution; Do not use with wallpaper. May not adhere well to vinyl surfaces. Do not use for antiques, heirlooms, or other valuable or irreplaceable items. Do not hang items over beds.- To Apply: 1. Clean surface with isopropyl rubbing alcohol, wipe gently, let dry. Do not use household cleaners. Separate strips. 2. Remove red liner. Press adhesive to hook. 3. Remove black liner. 4. Press to surface for 10 seconds. 5. Important: For maximum holding strength slide hook off. 6. And press base firmly for 30 seconds. 7. Slide hook on. 8. Wait 1 hour before use. To Remove: 1. Slide hook up to remove from mounting base. 2. Never pull strip towards you. 3. Hold base gently to prevent base from snapping fingers. Do not press base against wall. 4. Stretch straight down along wall at least 6 inches (15 cm) for small, 12 inches (30 cm) for medium and 15 inches (38 cm) for large until base and strip release. Important: Failure to follow instructions carefully may cause damage! Save instructions for damage-free removal or visit command.com. Note: Apply to surfaces above 50 degrees F (10 degrees C). Adhesive could lose adhesion above 105 degrees F (40 degrees C). Not intended for picture hanging. Instead use Command picture hanging strips, sawtooth or wire-backed hangers.
