Skip To Content
1/2
Black & Decker

Black & Decker 30' Replacement Trimmer Line Spool

Each
$8.29 each($4.32 / oz)
Victoria H‑E‑B plus!
6106 N. NAVARRO

Description

30 Feet of .065-Inch Line. Get more mileage out of your Black and Decker string trimmer with the Black & Decker AF100 String Trimmer Replacement Spool. The spool is factory wound, for maximum reliability and smoothness during operation. This Black and Decker replacement spool fits the GH400 and the GH500 models. For NST2018.

  • Allergens and safety warnings

    Cancer and reproductive harm - www.P65Warnings.ca.gov. To reduce the risk of injury, user must read instruction manual before operating product.

  • In order to replace or rewind the spool or clear a jam: 1. Disconnect the power source. Depress the tabs as shown in Fig. 1 to remove the cover. 3. Clear any broken line or debris and remove old spool. 4. Take line out of packaging and remove tape from spool. Hold end of line taught to prevent unraveling. 5. Insert the line and through the eyelet in the spool hub as shown in Fig 2. Maintain tension by pulling the line through the hole while placing the spool into the hub (arrow side up). See Fig. 3. Press the spool down and rotate it until it drops into place. When in place, the spool will turn a few degrees left and right freely. 7. Snap spool cap into place. Connect power source and turn the tool on. You will hear the nylon line being cut automatically to the proper length.