Armor All
Armor All Ultra Shine Headlight Restoration Wipes
6 ct
$11.42 each
In Cook & Grill on the Left Wall
Victoria H‑E‑B plus!
6106 N. NAVARRO
Description
Armor All Ultra Shine Headlight Restoration Wipes easily wipe away oxidation, restoring your headlights like new in two easy steps. Pre-moistened wipes eliminate the guesswork out of how much to use, requires no tools or sandpaper, cures in about 3 hours, and provides lasting UV protection.
• Easily wipe away oxidation to restore headlights like new
• No tools or sandpaper needed
• Pre-moistened wipes take the guess work out of how much to use
• Step one cleans and wipes away haze and yellowing caused by oxidation
• Step two wipes on UV Sealant Protection Coating for lasting UV protection
• Easily wipe away oxidation to restore headlights like new
• No tools or sandpaper needed
• Pre-moistened wipes take the guess work out of how much to use
• Step one cleans and wipes away haze and yellowing caused by oxidation
• Step two wipes on UV Sealant Protection Coating for lasting UV protection
Ingredients
Step 1: Contains Dimethyl Carbonate and 1-Propoxy-2-Propanol. Step 2: Contains 1-Hexanol and Diethylene Glycol Monobutyl Ether.Allergens and safety warnings
First Aid: Eye Contact: Flush eyes with water for 15 minutes. Get medical attention if irritation persists. Skin Contact: Wash with soap and water. Get medical attention if irritation persists. Remove and wash contaminated clothing. Ingestion: Do not induce vomiting. Never give anything by mouth to an unconscious or drowsy person. Rinse mouth with water. Immediately call a physician or poison control center. Inhalation: Move to fresh air. Get medical attention if symptoms persist.,Warning: Flammable. Eye irritant. Harmful if swallowed or absorbed through the skin. Carefully read cautions on back label. May cause respiratory irritation and nervous system effects such as headache and dizziness. Avoid breathing vapors. Do not swallow. Avoid contact with the eyes, skin and clothing. Wash hands after use. Use only with adequate ventilation. Keep away from heat, sparks, flames and all other sources of ignition. Keep out of reach of children.- Directions: Step 1: Oxidation Removal. Avoid Contact with Painted Surfaces: Use painter's tape to protect painted surfaces surrounding headlight. 1. Ensure headlight is clean and dry. 2. Open one Cleaning/Oxidation Removal pouch and remove wipe. Keep wipe folded to reduce evaporation. 3. Scrub headlight with firm, even pressure in a horizontal back-and-forth motion. You will notice the oxidation residue beginning to be removed. 4. Turn the wipe to clean side, keeping the wipe folded. 5. Continue to wipe, turning wipe to clean section as needed until no residue is visible on wipe. Discard wipe. 6. Open a second Cleaning/Oxidation Removal pouch and continue wiping back and fort with firm pressure for at least 2 minutes. Note: Though your headlight may appear clear, additional deep cleaning is necessary to ensure all oxidation is removed. 7. Repeat 1-6 on other headlight. Step 2: UV Sealant Protection. 1. Ensure surface is dry before applying sealant. For best results, first wipe surface with a clean, lint-free towel. 2. Open UV Sealant Protection pouch and pull out wipe. 3. Apply to the headlight surface by wiping in one direction, similar to applying a coat of pain. One wipe will coat two headlights, but use additional sealant wipe if needed. Avoid contact with painted surfaces. 4. Let surface dry completely. Surface will be dry to touch in about 3 hrs. Do not touch surface and avoid contact with water until dry. If spotting or streaking occurs from water contact before fully dry, repeat Step 1 and Step 2 with fresh wipes. Note: Drying time after Step 2 is dependent upon weather conditions. Drying may take longer in lower temperature or higher humidity. Restoring Your Headlights is Easy: Step 1: Clean/Wipe Away Oxidation; Step 2: Wipe on UV Sealant Protection Coating.
